|
AutoCAD Training Overview
To take full advantage of Building Information Modeling, the Revit® MEP 2011 Fundamentals course has been designed to teach the concepts and principles of creating 3D parametric models of MEP systems from engineering design through construction documentation. The Revit® MEP 2011 Fundamentals course is intended to introduce students to the software's user interface and the basic HVAC, electrical, and plumbing/piping components that make Revit MEP a powerful and flexible engineering modeling tool. The objective is to familiarize students with the tools necessary to create, document, and print the parametric model. This class is a full three days of training, where the examples and practices are designed to take the students through the basics of a full MEP project from linking in an architectural model to construction documents.
AutoCAD Training Topics
- Introduction to Revit® MEP, its interface, including viewing, drawing, and editing commands.
- Working with linked architectural files.
- Creating and modifying views.
- Creating spaces and zones.
- Analyzing heating and cooling loads.
- Working with the HVAC module to add air terminals, mechanical equipment, and create and analyze HVAC systems.
- Working with the Piping module to add mechanical equipment as well as creating and
analyzing hydronic piping systems.
- Working with fire protection systems.
- Working with fixtures, piping systems, and analysis tools in the Plumbing module.
- Working with components, circuits, cable tray, and conduits in the Electrical module.
- Creating and annotating construction documents.
- Detailing in Revit MEP.
Prerequisites:
An understanding of MEP terminology is an asset
AutoCAD Training Course Duration
24 hours
AutoCAD Training Course outline
Chapter 1 Introduction to Revit MEP
1.1 building information modeling(BIM)wint MEP
1.2 Overview of the Revit MEP interface
1.3 Opening a Revit MEP Project
1.4 Viewing Commands
Practice 1a open review a Project
Chapter 2 Basic Drawing and Editing Tools
2.1 General Drawing Tools
2.2 Editing Revit Elements
Practice 2a General Drawing and Editing
2.3 Basic Modifying Tools
Practice 2b Modifying Tools
Chapter 3 Starting Revit MEP Project
3.1 Starting Revit Project
3.2 Linking Revit Models
Practice 3a Starting Revit Project
3.3 Copying nonitoring and Linked files
3.4 Setting up levels
Practice 3b Linking and coordinating Revit Projects
Chapter 4 Views
4.1 Duplicating views
4.2 Adding callout views
4.3 setting the view display
practice 4a setting up Duplicate views and callouts
4.4 Creating Elevation
4.5 Creating sections
practice 4b creating Elevation and sections
4.6 working with ceilings
practice 4c working with ceilings
Chapter 5 Space and Zones
5.1 Creating spaces
Practice 5a space planing
5.2 Creating Zones
5.3 Creating colour schemes
Practice 5b Creating Zones
Chapter 6 Performances Analysis
6.1 Introduction to Energy Analysis
6.2 Preparing Energy Analysis
6.3 Analyzing the Heating and cooling Loads
6.4 Exporting for secondary Analysis
Practice 6a Heating and cooling Analysis
Chapter 7 HVAC Systems
7.1 About HVAC Systems
7.2 Adding Air terminal and Mechanical equipment
7.3 Adding duct work
Practice 7a creating a Basic HVAC Systems
7.4 Creating duct Systems
7.5 Automatic Ductwork Layouts
7.6 Analysing Duct Systems
Practice 7b Adding and Analyzing Duct Systems
Chapter 8 Hydronic and piping systems
8.1 About Hydronic and piping systems
8.2 Adding Mechanical equipment
8.3 Drawing and piping
8.4 Creating hydronic systems
8.5 Automatic piping layouts
8.6 Analyzing piping systems
Practice 8a working with hydronic systems
8.7 Fire production sysyems
Practice 8b working with Fire production sysyems
Chapter 9 Plumbing systems
9.1 About Plumbing systems
9.2 Adding plumbing Fixures
9.3 Drawing piping for plumbing sustems
9.4 working with plumbing systems
Practice 9a working with plumbing systems
Chapter 10 Electrical systems
10.1 About Electrical systems
10.2 Placing Electrical Components
10.3 Creating Electrial circuits
Practice 10a Inserting Electrical components and creating circuits
10.4 Cable trays and conduit
10.5 Electrical Panel Schedules
Practice 10b Addding conduit and Panel Schedules
Chapter 11 Construction Documents
11.1 setting up sheets
11.2 Placing and modifying views and sheets
Practice 11a Creating Construction Documents
11.3 Printing Sheets
Chapter 12 Annotating Construction Documents
12.1 Working with D mensions
Practice 12a Adding Dimensions
12.2 Working wiht Text
12.3 Adding detail line and Symbols
12.4 Creating Legends
Practice 12b Annotating Construction Documents
Chapter 13 Detailing in Revit MEP
13.1 Setting Up Detail views
13.2 Creating Details
13.3 Annotating Details
13.4 Patterning
Practice 13a Creating Details
|
